The excellent marketing in Indonesia biomass pellet production line rate depends upon your resources and outcome size. First off, you need to know what your raw materials are. The raw materials are prefabricated sawdust or timber chips and the moisture content of the materials is 10%-15%. A manufacturing facility provided brand-new technology timber pellet maker suffices. If your raw materials are unprocessed logs, branches, and so on need to be pulverized by a wood chipper as well as biomass crusher, then dried out in a clothes dryer (if the wetness goes beyond 15%, it needs to be dried), then the primary equipment is granulated, and then the packaging device packs this set of assembly line.
Understanding your resources is about the result. The output of the RICHI biomass pellet mill machine is various and the model is various, so the rate is also various. The biomass pellet assembly line price is not only a issue of reporting a number, yet it is needed to formulate a plan and quotation according to your requirements.
Firstly, the raw material wetness requirements of wood pellets are extremely strict. The wetness content of the material is expensive, which obstructs the die openings, to make sure that the particles can not be created; if the wetness content of the product is as well reduced, if it is as well dry, it is hard to form, and also the viscosity is inadequate.
Related case: 5T/H biomass wood pellet factory in Austria
Usually 12%-13%, 15-20% of the raw product moisture after modulation is the requirement for pressing wood pellets. If the raw material wetness is too expensive, the mold and mildew resistance as well as slipping phenomenon will occur after the raw product gets in the biomass pelletizer ring pass away; take note of regulate the dampness material of the raw material prior to entering the biomass pelleting equipment, If the water material is expensive, there will be slippage in the ring pass away, leading to the sensation that it is challenging to discharge.
If your raw material wetness fulfills the needs, a biomass timber pellet press maker can generate wood pellets. If it does not meet the needs, it needs to be dried, so it needs to be outfitted with a timber clothes dryer as well as a hot blast range. Obviously this is if your resources is wood chips. If your raw material is timber chips (thickness less than 0.5 mm), it needs to be pulverized, which is equivalent to including another procedure. Some consumers' resources are bark, which is also feasible after adding a timber pulverizer.
Nonetheless, some clients' raw materials are wood scraps, due to the fact that the price of timber scraps is cheap and simple to acquire, so there are several instances, then it is necessary to add a wood chipper, first to cut the non-standard timber scraps right into timber chips, and then most likely to squash.
For more details: Richi Machinery
WhatsApp：86 138 3838 9622
Email：enquiry@pellet-richi.com
For some consumers whose raw materials are waste structure templates, it is required to change the wood chipper to a bamboo plywood crusher.
Because the bamboo plywood itself has numerous iron nails, it is really easy to damage the blade on the wood chipper when using a wood chipper. Another reason is that the waste structure template is fairly wide, as well as the feed port of the wood chipper is normally 1250px.
It is difficult to by hand break it beforehand, right? The bamboo plywood crusher can enter any bamboo plywood with a feed opening of less than 1.25 m, and the gnawing knife of the bamboo plywood crusher is an ingot knife, as well as the iron nails have little impact on him.
Unlike wood chippers, the blades are quickly damaged. Bamboo plywood is also an advantage of making timber pellets. Usually, its dampness material is really small, in between 15-20%. As a result, using bamboo plywood as pellets saves the trouble of timber drying makers.