The main function of the fish feed drifting pellet making maker is to directly squeeze out puffed food. Usually, grains, potatoes or beans are utilized as the major basic materials.
After being extruded by thefloating fish feed making device, under the conditions of high temperature as well as high pressure, the product is puffed by utilizing the stress difference inside and also outside the device
The straight extrusion type puffed food usually does not include lead, as well as now the fish feed floating pellet making machine is widely utilized in the food industry. So how much do you understand about the floating fish feed extruder? The fish feed drifting pellet making maker has a pair of screws as well as a screw sleeve, which have the functions of mixing and also working.
Related post: Fish Feed Factory
After the raw product enters the squeezing out cavity, the material is subjected to extrusion, rubbing and shearing in between the screw sleeves, and the interior pressure remains to rise, as much as 4Mpa, and the temperature remains to increase, approximately 140 ℃.
Within 3-7s, the temperature and also pressure of fish feed drifting pellet making device surge dramatically, as well as the cells structure of the product changes, which even more gelatinizes the starch, denatures the protein, damages the unrefined fiber, and also eliminates harmful microorganisms such as Salmonella.
The high-temperature and also high-pressure product appears of the discharge port, and also its pressure is instantly launched in an instant, and also the dampness is partially flashed.
1. The structure of drifting pellet making maker.
The feeder is to make certain uniform as well as secure feeding, as well as adjust the feeding amount according to the ranked present value of the motor of fish feed drifting pellet making machine. Normally, an electro-magnetic speed-regulating electric motor or a frequency converter is made use of to adjust the speed, and also the feeding quantity of the feeder is altered.
Related post: https://www.richipelletmachine.com/fish-feed-factory/
Expansion tooth cavity of fish feed drifting pellet making device is made up of screw, screw sleeve, design template, card bone and more. The screw and also screw sleeve are incorporated in sections, the compression level can be readjusted according to the type and also requirements of the extruded feed, and the extruded level of the extruded feed can be altered;
The fish feed drifting pellet making equipment is split into 3 areas in regards to collapse degree according to operate and place:
① Feeding area: This section of floating fish feed device has a big screw pitch, as well as generally conveys and also compresses the product to make sure that the product fills the spiral groove;
② Compression area: The screw groove of this section adjustments from deep to shallow along the material relocating direction to compress the material;
③ Extrusion area: the screw groove is shallower, the pitch gradually becomes smaller, the extrusion force can reach 3.0-10Mpa, and the temperature can get to 120-150 degrees Celsius. This area has the highest possible pressure and highest temperature, so the wear of the screw and also screw sleeve is also one of the most significant.
The outlet of the extrusion area is a theme, the form of the layout is made with various die openings according to the requirements of various feeds, the product is squeezed out from the die opening of the template as well as goes into the atmosphere, the pressure as well as temperature level decrease dramatically, and also its quantity broadens swiftly, the water rapidly evaporates, dehydrates and solidifies to come to be an extruded material.
Related post: chicken feed manufacturing plant
2. Repair service of fish feed floating pellet making device
Transform the fish feed floating pellet making maker on-site control switch to the quit state throughout maintenance;
The inside as well as beyond the fish feed drifting pellet making equipment needs to be cleaned up after each change, especially the material should not be maintained in the puffing chamber, so as to avoid it being tough to tidy up after cooling down as well as pile;
The big pulley-block of the main shaft of the puffing chamber must be cleaned regularly, and also not too much dust, or else the wheel will certainly be out of balance and the puffing chamber will vibrate;
The primary bearing of the development chamber is oiled with lubricating oil, and the bearing of the fish feed drifting pellet making equipment conditioner and its transmission device and other bearing parts are oiled with grease; hop over to this web-site
The major bearing should be replaced with new oil regularly. After 250 hrs of work, all new oil must be replaced;
Other bearing parts, every 2 days of work, grease is infused once;
The chain transmission device on the steam conditioner ought to be oiled regularly;
The oil in the reducer of fish feed drifting pellet making device must be managed at the adjusted oil degree, as well as the new oil ought to be changed after 250 hrs of procedure;
When eliminating the screw head, do not knock it hard;
Constantly maintain the fish feed drifting pellet making equipment and its surroundings tidy.
For details please contact: pellet plant
WhatsApp:86 138 3838 9622
Email:enquiry@richipelletmachine.com
- February 2024 (3)
- January 2024 (3)
- October 2023 (3)
- August 2023 (15)
- July 2023 (9)
- June 2023 (3)
- May 2023 (12)
- April 2023 (4)
- March 2023 (6)
- February 2023 (3)
- December 2022 (6)
- November 2022 (6)
- October 2022 (5)
- August 2022 (7)
- July 2022 (2)
- June 2022 (1)
- May 2022 (5)
- April 2022 (6)
- March 2022 (1)