Today, marine drifting feed device technology is very popular in the manufacturing of aquafeeds, as it can be used to create a selection of feeds, whether drifting or sinking, depending on the requirements of each types. Additionally, the extruded feed made by water floating feed maker has much less contamination as well as high efficiency, helping to improve digestibility.
During the marine drifting feed machine extrusion process, devices such as temperature level, moisture, pressure will certainly increase starch gelatinization, break down as well as soften the cell wall surface and also launch some easily digestible materials, thus advertising the food digestion and absorption of farmed pets.
Via aquatic floating feed device extrusion modern technology, it is feasible to inhibit particular protease preventions (such as antitrypsin), destroy pathogens in raw materials or change healthy protein homes to additional improve the contact with enzymes in fish as well as shrimp, assisting to absorb food more quickly.
Extruded feed made by marine drifting feed equipment can regulate the material of compounds and also assist much better detoxing. At the same time, the longer stabilization time in the water (12-36 hours) helps farmers to observe as well as manage the feeding routine.
Related post: Floating Fish Feed Mill
Although extruded feed made by floating fish feed making equipment has evident advantages over pelleted feed, the initial investment cost of extruded feed production is higher, leading to higher feed expenses.
However, for high-end fish farming, increasingly more people are taking note of the market prospect of premium fish feed.
1. Main features of aquatic floating feed machine.
Feeding, rotary cutting, and also major drive all take on regularity conversion speed law system, which has solid power, steady operation, energy saving, high marine production efficiency, long lasting devices, low failure rate, and hassle-free operation as well as maintenance.
The screw of floating feed maker is made of alloy product by special procedure, the life span is 3-4 times longer than that of domestic comparable equipments, and the expense of producing feed is reduced; the segmented combined screw is suitable for a vast array of resources as well as more diverse products.
Automatic lubrication system of the floating feed equipment minimizes power consumption and also extends service life.
The feeding system adopts spiral forced feeding, and the feeding is uniform and also vast. It can be geared up with an automatic feeding system. The feeder is a screw conveying variable frequency speed control to adjust the feeding amount to manage the blowing output ( measurable feeding, and can effectively prevent the product from curving).
Related post: https://www.richipelletmachine.com/floating-fish-feed-mill/
Direct bearing device modification system, change the tool precisely as well as quickly.
The twin-screw of drifting feed maker has self-cleaning feature, as well as using equipment is a lot more reasonable and hassle-free.
Update the configuration of numerous equipment innovation and tools to make the output of the twin-screw floating feed maker bigger.
Various screws as well as length-diameter proportions can satisfy various production processes.
Visual automatic temperature control system to make temperature level control a lot more user-friendly and specifications extra precise.
The general floating feed maker arrangement The procedure of the fish feed pellet extruder is a lot more user-friendly and also the upkeep is easier.
Dry puffing process embraces self-heating approach without heavy steam system, which is more in line with the actual demands of users.
No adhesive is needed to refine the floating feed, as well as it can maintain stability in water for more than 12 hours.
Small and moderate tools is specifically appropriate for clinical study establishments, special breeding farms or medium as well as little feed manufacturing facilities. There are additionally particularly customized speculative twin-screw floating feed machines offered for scientific research systems.
2. The distinction between pellet feed as well as extruded feed.
With the growth of the drifting fish feed processing market, 2 widely made use of modern technologies currently utilized to generate aquafeed are pelleting and also extrusion by drifting feed equipment. Contrasted to natural baits, such feeds have higher dietary content as well as stability, less dampness, less complicated storage space, less pathogens, as well as much longer storage times.
Related post: cattle feed plant price
Pelletizing by drifting feed device is a technique of compressing tiny pellets of basic material into larger pellets, during which humidity, temperature and stress can significantly impact the quality of the feed.
Among the major advantages of pelleted feed is lower manufacturing costs. Nevertheless, it has some downsides.
One of the most significant downsides of pelleted feed is that it sinks faster and liquifies quickly in water (according to stats, concerning 10-15% of feed is wasted), which indicates higher feed costs, lower farming profits, as well as easier reason water pollution.
3. Select pellet feed or extruded feed?
Farmers, choose pellet feed or extruded feed?
When choosing feed, farmers should take into consideration the attributes of different water varieties and feeding routines. Since the routine of shrimps as well as crabs is to find food at the bottom, and afterwards eat the food gradually, so the food ought to not be too tough and not easily soluble in water.
Therefore, extruded debris by drifting feed device is the most effective selection since it is soft and also challenging to dissolve in water, as well as it is convenient for shrimp as well as crab to consume, decreasing feed waste and reducing water air pollution.
Specifically in extensive shrimp farming, squeezed out feed must be dominant, due to the fact that it is simpler for shrimp to digest healthy protein from extruded feed, which reduces feed waste and advertises better protein absorption.
At the same time, we can also enhance the absorption price of the feed by including helpful microbes or stimulating digestive items to the feed.
However, from a long-term point of view, using extruded feed, which is made by floating feed equipment will certainly boost the price, as well as if the fish usage squeezed out feed in the fully grown duration, it might bring about fish fat, huge stubborn belly, poor stress and anxiety capability, not ideal for long-distance transportation, and so on, causing a small cost at the time of sale.
Consequently, in the process of tank farming, when many farmers use feed, they commonly make use of a mix of pellet feed and also extruded feed, which not just regulates water top quality, lowers feed deposits, yet also improves productivity as well as economic advantages.
At the same time, the tank farming industry is advertising the more development of the two feeds as a result of their corresponding advantages.
Recommended Site
4. Setup of floating feed equipment.
( 1) Installment of drifting feed equipment pipe rack.
The selection of the setup placement of the pipeline rack relies on the website place, but it must not be also far from the main engine. Far from the primary engine will cause waste of materials during pipe connection on the one hand, as well as cause the hysteresis of the control system on the other hand.
If the setup location on site permits, the best placement of the pipeline rack is to be directly behind the main engine as well as conditioner, alongside the main engine, as well as regarding 1 meter far from the main engine (there is a certain upkeep room), while ensuring that the pipeline rack is changed upwards. The placement of the steam line user interface of the conditioner is on the side of the conditioner.
In order to assist in the cleansing of the ground and also the discharge of drainage in the future, the pipe rack must be raised by about 10 cm throughout installment. In the installation of each shutoff in the pipe, the placement of the shutoff wheel must fulfill the demands of convenient procedure for drifting feed maker.
( 2) Installment of floating feed equipment control box.
In order to promote the operation, the installation position of the on-site control box need to be selected near the bypass, and a certain room must be reserved between the bypass and the control box to momentarily position the wastes moving from the bypass.
The distance between the regularity converter of the reducing electric motor as well as the rotating positioner of the on-site cutter need to not be also much. It is managed by voltage. If the range is too far, it will create voltage changes and also affect the cutting effect.
The distributing temperature display tool on the on-site control box is to present the temperature level of each end of the puffing cavity in real time, and the displayed temperature level series has particular demands. Section 2 Expansion cavity ... till the material discharge growth dental caries, this series needs to be taken note of when circuitry the electric control.
Additionally, there are 4 nozzles on the water inlet pipe of the dual-shaft differential conditioner of drifting feed maker. They control the opening of each nozzle with the electromagnetic cut-off shutoff.
The floating feed machine conditioner inlet nozzle switches 1 to 4 on the control box represent the conditioners The first nozzle to the 4th nozzle from the feed end.
For details please contact: wood pellet press manufacturers
WhatsApp:86 138 3838 9622
Email:enquiry@richipelletmachine.com
- February 2024 (3)
- January 2024 (3)
- October 2023 (3)
- August 2023 (15)
- July 2023 (9)
- June 2023 (3)
- May 2023 (12)
- April 2023 (4)
- March 2023 (6)
- February 2023 (3)
- December 2022 (6)
- November 2022 (6)
- October 2022 (5)
- August 2022 (7)
- July 2022 (2)
- June 2022 (1)
- May 2022 (5)
- April 2022 (6)
- March 2022 (1)