When the biomass pellet making machine is functioning, we adjust the feeding amount as long as the product thickness in the feeding area is less than the maximum beginning point of journalism location, it will directly affect the size of the effective workspace of the pressing location and also journalism area, and also cause the current to move.
The variation as well as the modification of the per hour output of the biomass pellet making maker, as well as if the thickness of the product layer in the feeding area is more than the maximum beginning factor of journalism location, in addition to boosting the density of the product layer in the feeding location, it will certainly not impact the per hour output as well as power intake each time.
If there is any type of effect, it will no longer trigger adjustments in current and also biomass pellet making device result. Due to the fact that the thickness of the product layer in the feeding zone exceeds the maximum beginning point of the pressing area, the interval between the pressing zone and also the pressing area is constant with no adjustment. In the interval where the multi-feed product lies, the securing angle is greater than the vital rubbing angle, and the material will not be squeezed right into journalism location.
Related post: biomass pellet plant
This way, with the boost of the feeding amount of the biomass pellet making device, the balance of in and out is broken, as well as the in is more than the out, and the material layer in the feeding location is It will certainly accumulate thicker as well as thicker until all the gaps are loaded as well as blocked to the feed port, so that the biomass pellet equipment can not work normally. Currently, the current will certainly increase.
In the real job of the biomass pellet making equipment, with the modification of the feeding amount, the rapid outcome and also the current of the primary electric motor will transform appropriately. And also when the feeding thickness does not exceed the maximum beginning factor of the pressing location, it will not trigger more and more material layers in the feeding location as a result of the rise in the quantity of powder we feed.
As has been claimed before, the area that can create immediate result and also power intake modifications ought to be both areas of job and product layers - the compression location as well as the biomass pellet machine extrusion area, so we believe that the 3rd area mentioned above- - The sensible presence of the feeding location has particular conditions.
Related post: RICHI pellet making machine
That is to claim, the fed product layer is distributed in the compaction location, the extrusion area as well as the feeding location whose overall thickness does not go beyond the optimum entrance factor of the compaction area.
The biomass pellet making maker will certainly work generally under the allowable power. If the amount is as well large as well as exceeds the thickness of the maximum starting point of the compaction area, the product layer will certainly gather as well as slowly boost, as well as the biomass pellet making machine will certainly not function usually. Existing is varying.
Via the above evaluation, allow's go over some sensations displayed by the biomass pellet making equipment under 2 feasible working conditions:
( 1 )When the power of the major motor is not large sufficient compared with the corresponding biomass pellet making device granulation specifications, the thickness of our feed is at the end of the extrusion area and also the optimum entrance factor of the compression area (this will certainly differ with the raw materials, compression proportion, efficient length-diameter ratio, humidity, pressure rollers and also other variable aspects to adjust accordingly), usually will not surpass the maximum beginning point, with the rise of the feeding quantity, the compression area will certainly change as necessary.
Related post: 10T/H Biomass Wood Pellet Plant in USA
The size of the period will be shortened, and the interval size of the capture location will gradually enhance appropriately, as well as the current of the main motor will certainly additionally gradually enhance till it gets to the maximum permitted usage. If the existing reaches the defense value we established, and the density of the feeding material has actually not exceeded the density of the maximum starting factor of the biomass pellet device pushing area, if the feeding quantity is boosted, the safety system will act, as well as the excess powder will be discharged. In order to guarantee the regular function of biomass pellets.
( 2 ) Intend the power of the main motor is very large or the motor falls short to overload after the thickness of the feeding material surpasses the density of the maximum starting factor of the pressing location because of the thorough changes of several variables. Currently, the powder fed to individuals can not raise the moment output, nor will certainly it trigger the increase of the major electric motor current, but can only remain to raise the powder pile gathered in the device till the inner tooth cavity of the biomass pellet press device is blocked.
Trigger the biomass pellet making maker to not work effectively. Obviously, this unique sensation hardly ever occurs in real manufacturing (if the raw product dampness is as well large, the efficient element ratio is too tiny, the stress roller is drastically used as well as the space is not changed properly, the raw material is replaced, and so on, this sensation may occur), this is our unwanted conditions.
Related post: https://www.pellet-richi.com/wood-pellet-machine/biomass-pellet-mill.html
Extensive evaluation of the initial typically made use of functioning state, it is uncomplicated to understand that on the property that the pertinent conditions are unchanged, with the modification of the feeding amount, the interval length of the compression area as well as the extrusion zone is within a specific array Matching modifications are additionally made (the feed circulation rate is decreased, the size of the extrusion zone is reduced, as well as the size of the compression zone is prolonged; otherwise, the extrusion zone is expanded and also the compression area is shortened), as well as the feeding amount does not go beyond the pressure. When the thickness of the optimum starting factor of the limited area is concerned, the lengths of the above two intervals are not a constant value when this article is written. The larger the extrusion zone length value, the higher the biomass pellet maker production efficiency and the longer the pellet length per extrusion per roller.
Therefore, it is concluded that the factors of current instability under the condition of controlling the feeding amount need to be investigated from the moisture content of the raw material, the effective aspect ratio is too small, the pressure roller is severely worn and the gap is not adjusted properly, and the raw materials are replaced.
RICHI MACHINERY has been established for more than 25 years, specializing in biomass pellet making machine for sale, the development and production of single/complete pellet production lines such as animal feed, biomass fuel, wood waste, grass, straw, organic fertilizer, etc, and provide design and services for EPC/Turnkey projects!